按武藤1618,8个墨盒,正常一天出图100平计算.
100平的图,约需1000ML墨水
一个月就是30000ML,即:30瓶墨水
一个普通墨盒的容量是220ML,正常加墨量约为1500ML
正常加墨时间约为30SEC
清洗一个漏斗约为1MIN
即:加一个墨盒的时间需要1.5MIN
8个墨盒的时间即12分钟,中间换瓶等的时间不计算在内
12分钟加一次,加墨量约为150MLX8=1200ML
一个月的加墨时间约为:30000MLX12MIN/1200ML=300MIN
约为5个小时,
光加墨的年人工费用:2500/30天/8小时X5小时X12个月=626元
5小时X12个月=60小时
一个人在60个小时即约为7.5天的时间能给你创造多少价值呢?
7.5天X100平米X25元/平=18750元
装了本系统后,杜绝了外界杂质,无杂质后,喷头使用寿命更长,保守估计一年省一个喷头,按目前市场价3500计算。
装了本系统后,杜绝了忘记加墨导致的墨路断墨问题,机器更
稳定,从而大大提高生产效率,此项价值无法估计。
装了本系统后,保守估计,一年能给你节省成本:
626+18750+3500=22876元
而本系统的价格还不到此成本的1/10,您觉的合算吗
Big for ink detail and cost analysis
Item description: bottled, bags ink continuous ink system specifications: for without decryption chip even for system (chip optional)
YuWuTeng, Roland, is Mimaki series pictorial machine
The ink cartridge for existing shortcomings and the insufficiency
Add ink, funnel frequent contact with air, easily into the impurities, cause secondary pollution, make the ink quality decline.
Mass production, watch the cartridge, once ignored, ink level after you use the machine has broken the ink problems, to defuse a machine smoke ink and caused a lot of time, artificially waste.
The high level of ink cartridge appears to jilt ink phenomenon, is too low will appear the phenomenon of broken ink.
In printing process in the filling ink cartridges, will produce bubbles
Cost analysis
Press WuTeng 1618,8 a cartridge, normal day drawing 100 ping calculation.
100 flat figure, need about 1000ML ink
A month be 30000ML, namely: 30 bottles of ink
A common 220ML, the capacity of a cartridge with ink amount is about normal 1500ML
Normal time of about 30SEC add ink
Cleaning a funnel about 1MIN
Namely: add a cartridge time need 1.5 MIN
8 the cartridge is among 12 minutes of time waiting time for bottle doesn\'t count
12 minutes add once, add ink amount 150MLX8 = 1200ML about
A month of add ink time is about: 30000MLX12MIN / 1200ML = 300MIN
About five hours,
Add ink light in artificially expenses: 25/30 days / 8 hours X5 hours X12 months = 626 yuan
Five hours X12 months = 60 hours
A man in 60 hours i.e. about 7.5 days time can give you create much value?
7.5 days X25 X100 square meters 18750 yuan RMB/flat =Outfit ?
现有供墨墨盒的缺点与不足- 加墨时与空气,漏斗频繁接触,容易带入杂质,造成二次污染,使墨水品质下降。
- 大批量生产时,要随时注意墨盒的液位,一旦忽视,墨水用完后机器出现断墨问题,要拆机器抽墨,造成大量时间,人工浪费。
- 墨盒的液位过高会出现甩墨的现象,过低则会出现断墨的现象。
- 在打印过程中注墨,会在墨盒中产生气泡,造成断线,停机注墨则影响生产效率。
- 现有墨盒容量为220ML,容量太小,尤其是做加工客户,喷绘量大时,要频繁加墨,太麻烦。
所以改善现有的供墨方式早已迫在眉睫
经过本公司长期摸索,多位研发人员的长期努力,终于推出了目前市面上最好的供墨系统,给客户带来了福音